Database error: Invalid SQL: select count(id) from pwn_comment where pid='31167' and iffb='1'
MySQL Error: 1194 (Table 'pwn_comment' is marked as crashed and should be repaired)
#0 dbbase_sql->halt(Invalid SQL: select count(id) from pwn_comment where pid='31167' and iffb='1') called at [D:\WWW\hzkjjypp\includes\db.inc.php:73] #1 dbbase_sql->query(select count(id) from {P}_comment where pid='31167' and iffb='1') called at [D:\WWW\hzkjjypp\comment\module\CommentContent.php:65] #2 CommentContent() called at [D:\WWW\hzkjjypp\includes\common.inc.php:526] #3 PrintPage() called at [D:\WWW\hzkjjypp\comment\html\index.php:13] Database error: Invalid SQL: select * from pwn_comment where pid='31167' and iffb='1' order by id limit 0,10
MySQL Error: 1194 (Table 'pwn_comment' is marked as crashed and should be repaired)
#0 dbbase_sql->halt(Invalid SQL: select * from pwn_comment where pid='31167' and iffb='1' order by id limit 0,10) called at [D:\WWW\hzkjjypp\includes\db.inc.php:73] #1 dbbase_sql->query(select * from {P}_comment where pid='31167' and iffb='1' order by id limit 0,10) called at [D:\WWW\hzkjjypp\comment\module\CommentContent.php:167] #2 CommentContent() called at [D:\WWW\hzkjjypp\includes\common.inc.php:526] #3 PrintPage() called at [D:\WWW\hzkjjypp\comment\html\index.php:13] 汉中康居家园小区【官方网站】
广告位
当前日期时间
当前时间:
汉中康居家园小区
服务热线:18329608033

 

【官方网站】
地址:七里紫柏路838号
登录账号:
登录密码:
验 证 码:
 
您好,您已登录
您有条新到站内短信
会员中心 退出登录
点评详情
发布于:2019-5-13 02:47:07  访问:234 次 回复: 篇
版主管理 | 推荐 | 删除 | 删除并扣分
Remap Tuning Ecu
ECU remapping is really a method that is special works on the bespoke software package to fine tune the motor of a vehicle. An automobile engine is controlled by the engine management system (ECU). Remapping ECU is just a real way of enhancing the performance regarding the engine. The very best and a lot of car that is reputable companies use expert computer software which can be tailored to match a specific label of automobile. The car that is best remapping solutions will also just take your specific demands under consideration before remapping the car.
The engines are controlled by computers and therefore they rely heavily upon instructions from the car`s computer in today`s modern cars. This is the way it understands at just what level to perform effortlessly - the automobile`s performance is in effect, run by the motor administration system. Every motor is fitted with an variety of sensors that may monitor the engine`s performance although it is running. This information is delivered to the ECU to inform it the way the motor is doing. Things like throttle position, crank place therefore the airflow are typical supervised by the sensors. Then your ECU, or motor Control Unit, processes the information and gives the engine instructions so that it operates at its performance that is best, in whatever the driving conditions are at enough time.
A good remapping ECU service increases the ability and torque of a vehicle, giving a much smoother and gas drive that is efficient. It may also outcomes in smoother and faster acceleration and better overtaking manoeuvrability and rates.
If you`re considering remapping the ECU on your car, you should be aware of businesses claiming to be experts when they are actually low priced imitations regarding the real thing. They could appear as though they`re providing value for cash remapping solutions whenever in reality they truly are just making use of stock maps which are freely available on the internet. Be cautious, making sure you decide on a reputable vehicle remapping service which utilizes bespoke computer software made to fine tune your car or truck engine to your own precise requirements, perhaps not the requirements of somebody else. Utilizing a significantly less than reputable car service that is remapping possibly harm your car motor therefore be incredibly careful when looking for a company.
To be aware of Remap tuning ecu and Remap tuning ecu, check out all of our site Remap tuning ecu.
For GM domestic automobiles created before 1995, the diagnostic connector is situated underneath the dash panel by the motorist part. To get the check engine codes to flash in your dash panel, use a jumper cable or a paper clip and link terminals A and B regarding the diagnostic connector. Turn your ignition key on with engine off and the codes should begin to blink. All codes should focus on rule 12 which can be one flash that is long by 2 brief flashes. This rule 12 means the diagnostic system is normal and certainly will duplicate it self constantly if there are no difficulty codes. Otherwise, code 12 will flash three times before flashing the fault codes.
Ford owners can check always their check engine light utilising the connector that is diagnostic at the motor compartment by the fender nearby the battery. Getting the obd1 codes need a few tools: a 4 inches long gage 16 jumper cable and a 12 volt test light.
Both tools are hooked up towards the diagnostic connector and if the ignition key is switched on (without beginning engine) the codes will start to flash into the test light, perhaps not within the dash panel. If you have no rule, you shall usually get rule 11 or 111. On Fords, you will find 2 test modes, the KOEO (key on engine off) additionally the KOER (key on engine operating). Both test modes must be used getting the accurate evaluation for the saved fault codes.
Of the many 3 domestic vehicles, the method that is easiest to check the motor light is Chrysler items. Why? Because all you need is to turn the ignition key on and off a inside 5 moments and also the codes will begin to flash within the dash panel.
共篇回复 每页10篇 页次:1/1
共篇回复 每页10篇 页次:1/1
我要回复
回复内容
验 证 码
看不清?更换一张
匿名发表 
脚注信息

汉中康居家园小区【官方网站】
地址:汉中市汉台区七里紫柏路838号 电话:15319338949